Jaguar Exterior Trim Parts

PLASTIC PUSH ON NUT USED IN VARIOUS PLACES ON VARIOUS MODELS (AGU2436J)

DRIP MOULDING FINISHER CLIP PASSENGER SIDE FITS 1988-1992 XJ6 (BCC3684)

DRIP MOULDING FINISHER CLIP DRIVER SIDE FITS 1988-1992 XJ6 (BCC3685)

HOOD BUFFER, (RUBBER PAD) FITS 1988-1997 XJ6 AND ALL XJS. This is the rubber pad that fits on top of the hood adjustment bolt. (BD10224)

RIVET FASTENER FOR CHROME SIDE MOLDING FITS 1988-1994 XJ6 (BD267061)

CLIP AND RIVET FOR CHROME MOLDINGS FITS 1974-1989 XJ6 VDP (BD267062)

E-POST FINISHER GASKET DRIVER SIDE FITS 1993-1994 XJ6 (BDC4855)

CHROME MOLDING LEFT FRONT FENDER FITS 1988-1992 XJ6 VDP. Replaces BCC5807. NLA (BDC5721)

USED CHROME MOLDING LEFT FRONT FENDER FITS 1988-1992 XJ6 VDP. Replaces BCC5807 (BDC5721)

TRUNK BUFFER FOR LOCATING THE TRUNK, RUBBER GROMMET FITS 1988-1997 XJ6. Rubber bump stop for the boot lid. (BEC10761)

USED CHROME SIDE MOLDING SET (8 PIECES) INCLUDES BEC19044 THRU BEC19051 FITS 1988-1994 XJ6 MODELS (BEC19044)

USED CHROME MOLDING RIGHT FRONT FENDER FITS 1989-1994 XJ6 VDP XJ12. SHIPPING IS ADDITIONAL FOR THIS PART DUE TO ITS SIZE. NLA (BEC19044)

DOOR MOLDING RIGHT FRONT DOOR FITS 1993-1994 XJ6 VDP (BEC19046)

DOOR MOLDING LEFT FRONT DOOR FITS 1993-1994 XJ6 VDP. NLA (BEC19047)

E-POST TRIM INSERT RIGHT FITS 1994 XJ6 FROM VIN 673299 ON. NLA (BEC25020XXX)

UNDERSCUTTLE, RIGHT SIDE, TRIM CODE AEE, FITS 1988-1989 XJ6. (BEC26962AEE)

CHROME TRIM AROUND REAR LICENSE PLATE, 1988-1994 XJ6. (BEC7756)

JACKING POINT HOLE PLUG, FITS 1988-1997 XJ6 AND 1998-2003 XJ8. (CAC9397)

CHROME DOOR MOLDING DRIVER SIDE REAR DOOR FITS 1993-1994 XJ6 VDP (HMB5715AA)

USED CHROME FINSHER ON TRUNK LID COVERS THE EDGE OF THE TRUNK LID FITS 1988-1994 XJ6. This is the entire black metal panel with the chrome strip on it that houses the license lamps they always rust out and the chrome strip is not available seperately Jaguar calls this part a Tactile Panel. NLA (HMB6141BA)