Jaguar Control Arms, Shafts & Bushings

LARGE BUSHING FOR FRONT LOWER WISHBONE CURVED CONTROL ARM, FRONT SUSPENSION FITS 2010-2019 XJ (C2C4723)

WISHBONE, CONTROL ARM, FRONT LOWER CURVED ARM FITS EITHER SIDE 2010-2019 XJ REAR WHEEL DRIVE MODELS. C2D6343 (C2D49933)

STABILIZING LINK TIE ROD FOR REAR SUSPENSION, FITS 2010-2013 XJ, 2007-2015 XK AND 2009-2015 XF, NATURALLY ASPIRATED. Replaces C2Z3208 C2D5361 C2D5992 C2D49813 C2D51041 (C2D51043)

STABILIZING LINK TIE ROD FOR REAR SUSPENSION, FITS 2003-2008 S-TYPE FROM VIN M45255 ON AND 2004 ON XJ8 FITS EITHER SIDE. SAME AS C2C1802 C2C36985 C2C24305 C2C13835 C2D5993 (C2D51044)

BUSHING FOR FRONT SWAY BAR MOUNTS, FITS EITHER SIDE FITS 2010-2019 XJ (C2D5793)

WISHBONE STRAIGHT CONTROL ARM FRONT LOWER PASSENGER SIDE FITS 2003-2008 S-TYPE FROM VIN M45255 ON, 2004-2009 XJ8, 2007-2014 XK, 2009-2015 XF. Replaces C2P19954 C2C6533 C2C12101 C2C18325 C2C36795 C2C41387 (C2P24861)

WISHBONE STRAIGHT CONTROL ARM FRONT LOWER DRIVER SIDE FITS 2003-2008 S-TYPE FROM VIN M45255 ON, 2004-2009 XJ8, 2007-2014 XK, 2009-2015 XF. Replaces C2P19955 C2C1800 C2C12120 C2C18351 C2C36857 C2C41027 (C2P24862)

CAMBER BOLT, ECCENTRIC, FRONT LOWER CONTROL ARM ECCENTRIC BOLT FOR CAMBER ADJUSTMENT FITS 2004-2009 XJ8 AND 2003-2008 S-TYPE FROM VIN M45255 ON. C2C6206 C2C23853 (C2P7438)

BUSHING LOWER PENDULUM FOR REAR CONTROL ARM, FITS 1990-1997 XJ6, 1998-2003 XJ8. (CAC4713)

BUSHING, UPPER CONTROL ARM, FITS 1990-2003 XJ6, XJ12, XJ8. Does not fit the Series III XJ12. Sold individually, each car takes four. (CBC5523)

FRONT LOWER REAR WISHBONE CONTROL ARM PASSENGER SIDE FITS 1998-2003 XJ8, INCLUDES BALL JOINT AND BUSHING. (JLM21302)

FRONT LOWER REAR WISHBONE CONTROL ARM DRIVER SIDE FITS 1998-2003 XJ8, INCLUDES BALL JOINT AND BUSHING. (JLM21303)

USED UPPER CONTROL ARM RIGHT FRONT FITS 1998-2003 XJ8 and XJR (JLM21375)

USED UPPER CONTROL ARM LEFT FRONT FITS 1998-2003 XJ8 and XJR (JLM21376)

FRONT LOWER CONTROL ARM ECCENTRIC BOLT KIT INCLUDES 2 BOLTS, NUTS, AND WASHERS FOR CAMBER ADJUSTMENT DOES ONE WISHBONE ARM FITS 1998-2003 XJ8 XJR (JZB100098)

NUT FOR CAMBER BOLT FITS 1998-2003 XJ8 XJR AND 1992-1996 XJS LOWER FULCRUM BOLT (JZN100062)

USED FRONT LOWER FRONT WISHBONE CONTROL ARM DRIVER SIDE FITS 1998-2003 XJ8 XJR (MNC1311AF)

CAM PLATE FOR CAMBER BOLT FITS 1998-2003 XJ8 XJR (MNC1371AF)

UPPER CONTROL ARM, LEFT OR RIGHT, FRONT, Note: this is a bare arm it does not include bushings or the ball joint, they will need to be purchased seperately. FITS 1998-2003 XJ8 and XJR. Replaces JLM21375 and JLM21376 (MNC1424AA)

FULCRUM SHAFT FOR FRONT UPPER CONTROL ARM FITS 1998-2003 XJ8 (MNC1455AB)