Jaguar Rear Hubs, Bearings & Parts

USED DRIVERS OR PASSENGER SIDE REAR AXLE, HUB AND ALUMINUM HUB CARRIER FULLY ASSEMBLED COMPLETE WITH ALL THE SEALS AND BEARINGS. FITS 1979-1997 XJ6 MODELS Fully assembled, complete with all the seals and bearings. Make sure to tell us what year and model Jaguar you need it for and which side of the car it`s for by typing this information in Special Instructions section of the checkout form. Email or call us if you have questions on this part. (AXLE)

BEARING TAPERED, BOTTOM OF REAR HUB CARRIER. FITS XJS 1993-1996 FROM VIN 188105 WITH OUTBOARD BRAKES, XJ6 1988-1997, XK8 XKR 1997-2006, XJ8 1998-2003. 2 REQUIRED PER WHEEL, 4 PER CAR, SOLD INDIVIDUALLY. (CAC4610)

USED REAR HUB CARRIER RIGHT SIDE FITS 1988-1989 XJ6 (CBC1534)

USED REAR HUB CARRIER LEFT SIDE FITS 1988-1989 XJ6 (CBC1535)

SEAL, INNER FOR REAR HUB FITS 1988-1997 XJ6, XJS FROM VIN 188105 ON, AND ALL XJ8 & XK8 (CBC1706)

USED PIVOT PIN BOLT FOR REAR HUB CARRIER, FITS 1988-1993 XJ6 UP TO VIN 687218. (CBC2589)

CONICAL LOCATING COLLAR FOR REAR AXLE NUT, FITS 1988-2003 XJ6 AND XJ8, 1997-2006 XK8, 1993-1996 XJS. (CBC6652)

WHEEL BEARING SPACER REAR HUB FITS 1990-1994 XJ6 AND 1997-2006 XK8, 1993-1996 XJS. NLA (CBC8207)

USED PASSENGER SIDE HUB CARRIER FITS 1990-1994 XJ6. (CCC3984)

USED DRIVERS SIDE HUB CARRIER FITS 1990-1994 XJ6. NLA (CCC3985)

SEAL, OUTER FOR REAR HUB FITS 1988-1997 XJ6, XJS FROM VIN 188105 ON, AND ALL XJ8 & XK8 (CCC4466)

REAR AXLE WHEEL HUB NUT FITS 1988-1997 XJ6, 1997-2003 XJ8, 1997-2003 XK8, 1993-1996 XJS. This nut is designed to only be torqued once and should not be reused. (JZN100035)

REAR HUB ASSEMBLY FITS 1988-1997 XJ6, 1997-2000 XJ8 UP TO VIN F12667, 1997-2000 XK8 UP TO VIN A07078, 1993-1996 4.0 & 6.0 XJS. This is the hub that the wheel bolts to it comes with the wheel studs but not the wheel bearing. Replaces CCC2913 CBC8936 CAC6400 (MNA3337AA)

REAR HUB ASSEMBLY FITS 1988-1997 XJ6, 1997-2000 XJ8 UP TO VIN F12667, 1997-2000 XK8 UP TO VIN A07078, 1993-1996 4.0 & 6.0 XJS FROM VIN 188105 ON. This is the hub that the wheel bolts to it comes with the wheel studs but not the wheel bearing. (MNA3337AA)

BUMP STOP REAR SUSPENSION FITS 1988-1994 XJ6 (MNA3750BA)

PIVOT PIN SLEEVE FOR REAR HUB CARRIER, FITS 1988-1997 XJ6. Replaces CAC5846 (MNE4520AA)