Jaguar Control Arms, Shafts & Bushings

BEARING & SEAL KIT, REAR HUB CARRIER LOWER PIVOT FITS 1969-1987 XJ6 and all XJS up to 1994 WITH INBOARD BRAKES. This kit has the bearings and seals for the outer wishbone. Each kit includes 4 C16029 bearings and 4 C20178 felt seals which is enough to do both sides of the car. The inner wishbone bearing and seal kit is part number C17167/SET. Kit includes rubber seals. One kit does both sides of the car. (C16029)

CONTROL ARM SPACER, REAR SUSPENSION FITS 1976-1993 XJS & 1969-1987 XJ6. (C16628)

INNER FULCRUM SHAFT, REAR WISHBONE, FITS 1974-1987 XJ6 AND ALL XJS. (C17008)

BEARING AND SEAL KIT, REAR CONTROL ARM PIVOT AT THE IRS UNIT. FITS 1969-1987 XJ6 and all XJS models. Does both sides of the car. This kit has the bearings and seals for the inner wishbone. Each kit includes 8 C17067 bearings and 8 C17213 rubber seals - enough to do both sides of the car. The outer wishbone bearing and seal kit is part number C16029/SET. (C17167)

TUBE BETWEEN BEARINGS INNER REAR WISHBONE FITS 1969-1987 XJ6 1976-1993 XJS (C171681)

RUBBER SEAL, FOR THE BEARINGS ON THE INNER SWING ARM PIVOT. FITS 1980-1987 XJ6 AND 1976-1992 XJS. These seal the grease in the bearings, and can be found at the lower IRS pivot next to the differential. Each car takes eight. (C17213)

SEAL RETAINING RING, SWING ARM PIVOT AT THE DIFFERENTIAL. Each car takes eight. (C17936)

SEAL RETAINING RING, SWING ARM PIVOT AT THE DIFFERENTIAL. Each car takes eight. (C17936)

SEAL, FELT, FITS 1980-1987 XJ6, AND ALL XJS. (C20178)

OIL SEAL SHELL FOR C20178 FELT SEAL FITS 1980-1987 XJ6, AND ALL XJS (C20179)

FULCRUM SHAFT FOR UPPER WISHBONE CONTROL ARM FITS 1969-1987 XJ6 XJ12 and 1976-1996 XJS (C27859)

USED FULCRUM SHAFT FOR UPPER WISHBONE CONTROL ARM FITS 1969-1987 XJ6 XJ12 and 1976-1996 XJS (C27859)

USED UPPER CONTROL ARM LEFT FRONT ASSEMBLY FITS ALL XJS (C30612-14)

SPECIAL WASHER LOWER CONTROL ARM FULCRUM SHAFT FITS 1980-1987 XJ6 AND 1992-1996 XJS

SPECIAL WASHER LOWER CONTROL ARM FULCRUM SHAFT FITS 1980-1987 XJ6 AND 1992-1996 XJS

BUSHING SET, FOR FRONT LOWER CONTROL ARM. FITS 1969-1987 XJ6 AND ALL XJS AND XKE. One set includes 4 bushings which does both sides of the car. (C8673)

BEARING TAPERED, BOTTOM OF REAR HUB CARRIER. FITS XJS 1993-1996 FROM VIN 188105 WITH OUTBOARD BRAKES, XJ6 1988-1997, XK8 XKR 1997-2006, XJ8 1998-2003. 2 REQUIRED PER WHEEL, 4 PER CAR, SOLD INDIVIDUALLY. (CAC4610)

BUSHING, FOR FRONT UPPER CONTROL ARM, FITS XJ6 FROM 1969-1989 AND ALL XJS AND V12 XKE. This is one bushing each car uses 4 so you will need to purchase 4 per car. (CAC9295)

PIVOT PIN OUTER REAR LOWER CONTROL ARM TO HUB CARRIER FITS 1969-1987 XJ6, 1976-1996 XJS (CBC9118)

USED LOWER CONTROL ARM, LEFT FRONT, FITS 1988-1996 XJS FROM VIN 139052 ON (CCC7455)