Jaguar Gaskets

GASKET SET, V12 WATER MANIFOLDS. DOES BOTH SIDES. FITS 5.3 LITER XJS. Includes 8 gaskets enough to remove and replace the two water rails along the side of the engine. C30344 (EBC9634)

GASKET, SANDWICH PLATE (LARGER GASKET JUST ABOVE THE OIL PAN GASKET) FITS V12 ENGINES. (EBC9637)

OIL SEAL, FRONT CRANKSHAFT OIL SEAL, THIS INCLUDES THE METAL DISTANCE PIECE COLLAR, FITS 1980-1996 5.3 & 6.0 V12 ENGINES. C30002 C32197 (JLM10613)

HEAD GASKET SET, FITS 1988-1993 XJ6 AND 1994 XJS 4.0 LITER AJ6 up to engine number 179548. Includes head gasket and all other engine gaskets above the head gasket. You need to replace the head bolts when you reinstall the head. The head bolt set is part number EBC1771SET. These are special torque-to-release bolts that need to be replaced once they are used. Comes with qty 6 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 6 additional EBC3531 valve seals if you would like to install on the exhaust valves. NLA (JLM11088)

HEAD GASKET SET, FITS 1988-1993 XJ6 AND 1994 4.0 LITER XJS up to engine number 179548. Includes head gasket and all other engine gaskets above the head gasket. You need to replace the head bolts when you reinstall the head. The head bolt set is part number EBC1771SET. These are special torque-to-release bolts that need to be replaced once they are used. Comes with qty 6 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 6 additional EBC3531 valve seals if you would like to install on the exhaust valves. (JLM11088)

HEAD GASKET SET, FITS 1993-1994 XJ6 FROM ENGINE #179542 ON, AND 1994 XJS 4.0 LITER AJ6 FROM ENGINE #179549 ON. Includes all gaskets necessary to install the head. You need to replace the head bolts EBC1771SET when you reinstall the head. These are stretch bolts, that must be replaced each time. Comes with qty 12 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 12 additional EBC3531 valve seals if you would like to install on the exhaust valves. (JLM11383)

GASKET SET, LOWER ENGINE, FITS 5.3 AND 6.0 LITER V12 XJS AND XJ12. Includes all engine block gaskets and seals below the head gaskets. Replaces JLM9529 (JLM11517)

LOWER ENGINE GASKET SET FITS 1988-1997 XJ6, AND 4.0 LITER XJS. INCLUDES ALL LOWER SHORTBLOCK GASKETS & SEALS. (JLM11574)

NLA HEAD GASKET SET, FITS 1995-1997 XJ6 1995-1997 XJR AFTER ENGINE# B107675 AND 1995-1996 XJS 4.0 MODELS AFTER ENGINE # B107675. Includes the head gaskets and all other engine gaskets above the head gasket. (JLM11649)

HEAD GASKET SET, FITS 1995-1997 XJ6 AND 1995-1996 XJS 4.0 MODELS AFTER ENGINE #B107675. INCLUDES ALL GASKETS & SEALS FOR THE TOP END. (JLM11649)

HEAD GASKET SET, 1980-1993 V12 XJ12, XJS AND 1993-1997 XJ12. One set does both heads, and includes the head gaskets and all other engine gaskets above the head gasket. Comes with qty 12 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 12 additional EBC3531 valve seals if you would like to install on the exhaust valves. (DE880) (JLM12229)

FILTER HOUSING GASKET TO BLOCK FITS 1993-1996 4.0 XJS AND 1990-1997 XJ6 XJR (NBB1715AA)

FILTER HOUSING GASKET FITS 1990-1997 XJ6 XJR AND ALL 4.0 XJS (NBB1716AA)